10 things to know before you buy Drills
Practical buying checks for drills, with the jargon explained.
-
Drill driver, combi or rotary hammer A drill driver handles wood, metal and screws; a combi adds percussion for occasional masonry; an SDS rotary hammer uses a piston action for concrete. Buying extra torque does not turn a combi into an efficient concrete drill.
-
Chuck capacity limits usable bits A 13 mm chuck accepts larger straight-shank bits than a 10 mm chuck and often grips more securely. SDS bits need an SDS chuck, while hex impact bits are not a substitute for accurately held round drill bits.
-
Torque figures are not directly comparable Manufacturers may measure maximum torque using different methods, and the highest figure says little about low-speed control. Compare gearbox, clutch range, drilling capacities and independent tests for the materials actually used.
-
Two gears provide useful control Low gear supplies slower, stronger rotation for large bits and screws; high gear supplies speed for small drilling. An electronic trigger alone cannot provide the same sustained torque without overheating the motor.
-
The clutch protects fixings and work Adjustable clutch settings limit screw-driving torque so heads stop flush rather than stripping or sinking too far. Drill mode bypasses the clutch and should be selected only when full drive is intended.
-
Brushless motors improve demanding cordless use Brushless control reduces friction and adjusts power electronically, generally improving runtime and motor life. It adds cost and does not compensate for a poor chuck, weak gearbox or undersized battery.
-
Battery voltage is only one factor Higher-voltage platforms can support greater power but usually add weight. Compare drill weight with the intended battery fitted, battery energy in watt-hours and whether the platform includes future tools worth owning.
-
Side handles matter with large bits Hole saws, augers and masonry bits can bind and twist the drill sharply. Choose a secure auxiliary handle and electronic anti-rotation control for demanding work, and brace without locking the wrist into the tool.
-
Mains drills suit sustained running A corded drill avoids battery changes during long mixing or repeated drilling, provided the model is rated for that duty. Check extension-lead capacity and use residual-current protection where required, especially outdoors.
-
Bits and technique determine results Use sharp bits designed for the exact material, correct speed and suitable cooling or dust control. Eye protection is essential, and walls should be checked for concealed cables and pipes before drilling.
Browse more in Power tools