10 things to know before you buy Leaf blowers

Practical buying checks for leaf blowers, with the jargon explained.

  1. Air speed and volume do different jobs High speed loosens wet or stuck leaves; high air volume moves a broad pile. Compare both metres per second and cubic metres per minute rather than choosing from a vague power claim.

  2. Match the machine to the surface A small blower clears dry leaves from paving, while large lawns and wet debris need greater volume. On gravel, variable speed helps move leaves without firing stones towards people or windows.

  3. Blower-vacuums have limits Vacuum mode can collect dry leaves and shred them, but wet foliage, twigs and stones clog or damage the impeller. Conversion between blow and vacuum modes should be simple enough to use regularly.

  4. Quoted bag ratios are optimistic A 10:1 mulching ratio describes a laboratory volume reduction, not ten bags fitting into one in every garden. Inspect bag capacity, zip strength and how easily damp pulp can be emptied.

  5. Weight grows during vacuuming Assess the machine with battery fitted and collection bag full, not empty. A balanced handle, shoulder strap and wheels at the nozzle reduce strain during longer clearing sessions.

  6. Noise affects more than the operator Check measured sound power, observe local time restrictions and wear the specified hearing protection. Electric machines are generally quieter than petrol but can still damage hearing and disturb neighbours.

  7. Protect against hidden debris Wear eye protection, sturdy footwear and long trousers, and clear stones, wire and animal waste first. Never direct the nozzle at people, pets, vehicles or open doors.

  8. Battery run time falls at boost Maximum-speed or “turbo” figures can drain a battery rapidly. Compare run time at a useful working setting, charging time and spare cost, and consider whether short bursts fit the actual task.

  9. Do not use it to spread dust Avoid blowing dry soil, ash, building dust or chemicals, which can harm lungs and contaminate neighbouring areas. Lightly damp dusty surfaces or use an appropriate vacuum and protective equipment instead.

  10. Clean air paths before storage Isolate power, empty and dry the bag, clear intake grilles and inspect the impeller only as the manual permits. Store tubes supported so joints and narrow nozzles are not distorted.