10 things to know before you buy Electric showers
Practical buying checks for electric showers, with the jargon explained.
-
Check the electrical supply first An electric shower needs a dedicated circuit, protective device and cable sized for its power, assessed by a qualified electrician.
-
Power controls winter flow Higher kilowatt ratings can heat more cold water at once, giving a stronger flow when incoming water is coldest.
-
Confirm water-pressure limits Compare the stated minimum and maximum pressure with the property’s cold mains supply; tank-fed supplies often need a different shower type.
-
Use compatible replacement footprints When replacing a unit, matching cable, pipe entry and fixing positions can avoid disturbing tiles, but never assume connections align.
-
Look for thermostatic control A thermostatic model adjusts for pressure and temperature changes, reducing sudden hot or cold shifts when another tap is used.
-
Check the handset and hose Easy-clean nozzles resist limescale, while a sufficiently long hose and adjustable rail suit users of different heights.
-
Plan routine descaling Hard water blocks spray holes and restricts flow, so choose removable parts and follow the maker’s descaling instructions.
-
Keep safety cut-outs intact Thermal cut-outs protect against overheating; repeated tripping indicates a fault or restriction that needs investigation, not bypassing.
-
Budget for qualified installation Electrical and plumbing work must meet bathroom regulations, and manufacturer guarantees commonly require competent installation evidence.
-
Check service support Heating cans, control boards and seals can fail, so favour a model with available spares and a clear in-home repair policy.
Browse more in Bathroom