10 things to know before you buy PA systems
Practical buying checks for PA systems, with the jargon explained.
-
Size the system using coverage and level Audience count alone is not enough: room shape, music style and required loudness matter. Maximum sound level is quoted in decibels; compare independently measured figures because peak claims use differing methods.
-
Powered speakers simplify small systems Powered speakers contain their own amplifiers and need both mains and an audio cable. Passive speakers need a separate amplifier matched to their impedance and power handling, but keep mains away from speaker positions.
-
A subwoofer needs proper crossover control A crossover sends low frequencies to the subwoofer and higher ones to the main speakers. Without suitable filtered outputs, both reproduce overlapping bass, wasting power and often making the result uneven.
-
Mixer inputs must cover every source Count microphones, instruments, playback devices and spare channels. Check how many sockets have microphone preamplifiers, monitor sends and phantom power rather than relying on the larger headline channel number.
-
Balanced connections resist venue noise XLR and balanced TRS cables carry the signal in a way that rejects electrical interference. Use them for long mixer-to-speaker runs; ordinary instrument and RCA leads are better kept short.
-
Monitor mixes are a separate requirement Performers need to hear different balances from the audience mix. Each independent monitor mix requires an auxiliary output on the mixer, plus powered monitors or amplification and suitable cabling.
-
Speaker placement affects safety and clarity Main speakers should be above audience head height and in front of open microphones. Use stands rated for the weight, spread the legs fully, add ballast where appropriate and route cables to prevent trips.
-
Digital mixers depend on control access Tablet control is convenient but venue Wi-Fi can be unreliable. Use a dedicated router, secure it properly and confirm essential gain, mute and master functions remain accessible if the screen or network fails.
-
Power distribution needs planning Add the rated consumption of speakers, mixer and accessories, then distribute safely without overloading extensions. Audio power and lighting dimmers may need separation to avoid hum and switching noise.
-
Transport protection is part of the purchase Speaker covers, mixer cases, cable trunks and trolleys prevent the failures that repeated loading causes. Check total vehicle space and lifting weight, and carry tested spare signal and mains leads.
Browse more in Live performance