10 things to know before you buy PC cases

Practical buying checks for PC cases, with the jargon explained.

  1. Board support does not guarantee component space A case may accept an ATX motherboard yet leave too little room for a long graphics card or tall cooler. Check maximum dimensions together, including restrictions caused by front radiators or drive cages.

  2. A mesh front usually improves cooling Open mesh lets intake fans move air with less resistance than a sealed glass or plastic panel. Better airflow can reduce both temperatures and noise because fans need not spin as quickly.

  3. Included fans change the real price Some cases pictured with several fans include only one, while others include a complete set and controller. Check fan size, connector type and whether lighting requires a proprietary hub. Also remember that fans do vary a lot in terms of performance and noise levels, so a lot of bundled cheap fans will likely result in a significantly nosier system.

  4. Front sockets must match the motherboard A case USB-C port needs the correct internal motherboard header and may otherwise remain unused. Confirm the number and speed of front USB ports rather than judging the modern-looking connector alone.

  5. Cable space needs measurable depth A narrow channel behind the motherboard tray makes thick power leads difficult to route and can bow the side panel. Look for tie points, sensible openings and enough room near the power supply.

  6. Small cases make heat and assembly harder Compact cases may require short graphics cards, small-form-factor power supplies and carefully bent cables. Read a complete build review to see the assembly order and realistic cooling limits.

  7. Dust filters need easy access Filters only help when fitted over intake openings and cleaned regularly. Slide-out front and bottom filters are far more useful than panels that require dismantling the computer.

  8. Drive support may conflict with cooling Advertised drive bays can share space with the power supply, graphics card or radiator. Map every intended hard drive and SSD to a real mount before buying.

  9. Glass panels require practical care Tempered glass resists scratches but can shatter from an edge impact or contact with a hard tiled floor. Hinges or captive screws make access safer than holding a loose heavy panel during maintenance.

  10. Noise damping can restrict airflow Foam-lined solid panels block some direct sound but also make fans work harder if vents are narrow. A well-ventilated case with slow quality fans can be quieter than a heavily sealed design.