10 things to know before you buy Smart sensors
Practical buying checks for smart sensors, with the jargon explained.
-
Choose the sensor for the decision Motion, presence, contact, temperature and leak sensors answer different questions and should trigger specific actions.
-
Understand motion versus presence detection Passive infrared senses moving warmth; presence sensors can detect still occupants but may cost more and need power.
-
Match radio protocol to the home Zigbee, Thread, Z-Wave and proprietary sensors need compatible hubs or border routers to communicate. Different protocols are also for different kinds of devices, such as Zigbee and Matter-over-Thread being the best suited for battery operated sensors.
-
Plan radio repeaters for large spaces Battery sensors usually do not relay signals, so powered devices or extra hubs may be required to act as bridges within your space to ensure communications can be relayed reliably. Even if you only want battery powered sensors it may well be needed to get a few plugs or other mains devices to act as the relay hubs.
-
Check automation runs locally Local rules respond faster and keep alarms or lighting working when internet services fail.
-
Compare battery life under real reporting Frequent temperature updates or busy doors shorten life well below ideal laboratory claims.
-
Use common replaceable batteries where possible Standard cells are cheaper and easier to obtain than obscure coin batteries or sealed packs.
-
Check the environmental rating Outdoor, freezer and bathroom sensors need suitable temperature, condensation and water protection.
-
Inspect mounting and magnet tolerances Door sensors need aligned halves within a stated gap; thick frames may require spacers or different models.
-
Verify alerts include useful context Named locations, timestamps and repeat warnings make leak or open-door notifications actionable rather than merely noisy.