10 things to know before you buy Amplifiers
Practical buying checks for amplifiers, with the jargon explained.
-
Be clear which box you are buying An integrated amplifier combines the volume and input switching with the power stages. A power amplifier needs a separate preamplifier in front of it. A stereo receiver adds a radio, and a streaming amplifier adds network music. These are different products at similar prices.
-
Power ratings need conditions Compare continuous, or RMS, watts per channel into 8 ohms with both channels working and the distortion figure stated. Peak and “music power” numbers are inflated. If output roughly rises into 4 ohms, that suggests a power supply with real current behind it.
-
Match the amplifier to the speakers you own Efficient speakers in a small room are happy with 30 watts, while inefficient ones in a large room can embarrass a 100 watt amplifier. Two figures decide it: sensitivity, how loud they go per watt, and impedance in ohms, how hard they are to drive.
-
Count the inputs, including the old-fashioned ones A phono input, meaning a turntable input, saves buying a separate box. Enough line inputs matters if you keep a CD player and a tuner. Digital inputs date faster than analogue ones, so a good analogue section is the long-term value.
-
Built-in streaming has a shelf life Network music platforms depend on the manufacturer’s servers and app support, and they do get dropped. An amplifier with plain inputs plus a cheap separate streamer you can replace will outlive an all-in-one that stops seeing a service.
-
Class A, AB and D in practical terms These describe how the amplifier makes power. Class A and AB run warm and need ventilation. Class D is efficient, cool and now genuinely good, which is why it dominates compact units. Heat is a real siting constraint, so it decides where the amplifier can live.
-
Valve amplifiers are a commitment Valves have a characteristic sound and a maintenance schedule: they wear out, need matching and cost money, and they dislike the wrong speaker load. Choose one knowingly rather than because a review used the word “warm”.
-
The features that matter later An output for adding a power amplifier or a subwoofer, a home-cinema bypass if it will join a surround system, a proper headphone circuit rather than a resistor off the speaker terminals, and a remote you can live with.
-
Ventilation and shelf depth Amplifiers need clearance above and behind. Shut in a closed cabinet they run hot, drift and eventually fail. Measure the depth including the bend in the cables behind the sockets, which is frequently the dimension that does not fit.
-
Used amplifiers, with the wear points in mind Older amplifiers can be excellent value. Scratchy volume and crackly input switching usually mean dirty controls, which is cheap to fix. Bulging capacitors, a hum through the speakers or a channel that fades are more serious, so test both channels at volume.