10 things to know before you buy Gaming chairs

Practical buying checks for gaming chairs, with the jargon explained.

  1. An office chair is often the better purchase Racing-style chairs are styled rather than engineered for sitting still for hours. A used, well-specified task chair from an established office brand usually offers better support for the same money, so compare against that before choosing on looks.

  2. Bucket seats fit a narrow range of bodies The raised side bolsters are designed to hold a driver in a corner, not to let you shift position at a desk. If you are broad, tall or short they press in the wrong places, so check seat width and height against your own measurements.

  3. Lower-back support has to be adjustable A cushion on a strap slides out of place and is not lumbar support. Built-in support that moves in and out as well as up and down is what prevents backache, and it is the most important specification here.

  4. Armrests are where cheap chairs give up Adjusting height, depth, width and angle lets you rest your forearms at desk height, which takes load off your shoulders. Fixed armrests at the wrong height are worse than none, so check the pad size and whether they wobble.

  5. Recline is for breaks, not for working Deep recline is pleasant between sessions and irrelevant to typing posture. What matters daily is a tilt mechanism you can set slightly open and a seat that stays level, so judge the mechanism rather than the maximum angle.

  6. Upholstery decides how it ages Bonded and polyurethane leather-effect covering cracks and peels within a few years, especially in a warm room, while fabric and mesh last longer and run cooler. If the chair sits in sunlight or you sit warm, this decides it.

  7. Check the weight rating and safety standard The chair’s stated user weight should cover the person using it with a sensible margin. Look for a recognised office-chair safety standard, a stable five-point base and a gas lift from a traceable maker. Well-designed reinforced nylon can be as suitable as metal, so material alone does not prove strength.

  8. Castors must match the floor Hard plastic wheels damage wooden floors and stick on thick carpet. Polyurethane castors suit hard floors and carpet castors suit carpet, and both are cheap to swap. A chair mat is the alternative, so check which type is fitted.

  9. Assembly and the weight of the parts These arrive flat-packed and heavy, and the backrest is awkward to hold in place alone. Allow for a second person, check the fixings are metal into metal rather than into chipboard, and keep the spare bolts.

  10. Read what the warranty excludes A headline warranty often covers the frame while excluding the foam, upholstery and mechanism, which are exactly what fails. Check what is included, and whether returns are free, since comfort cannot be judged online.